PmodTMP Weatther Sttattiion Demo
2016-08-23
1 0 0
no vote
Other
Earn points
This demo shows how to utilize two PmodRF1 Wireless Radio Transceivers to communicate data.
The project is divided into two components, a base station and a remote station. Each station is
controlled by a Cerebot Nano microcontroller board, which receives temperature data from a
PmodTMP thermometer.
The temperature data from the monitoring station is transmitted wirelessly to the base station using
the two PmodRF1s. Once the base station receives the remote temperature data, it shows both the
base and remote temperature on the PmodCLS display. The remote station then sleeps for 30
seconds to conserve battery power. After 3
The project is divided into two components, a base station and a remote station. Each station is
controlled by a Cerebot Nano microcontroller board, which receives temperature data from a
PmodTMP thermometer.
The temperature data from the monitoring station is transmitted wirelessly to the base station using
the two PmodRF1s. Once the base station receives the remote temperature data, it shows both the
base and remote temperature on the PmodCLS display. The remote station then sleeps for 30
seconds to conserve battery power. After 3
vhdl
演示
PmodTMPWeattherSttattiion
Related Source Codes
EE247 Analysis and design of analog-to-digital int
0
0
no vote
Beiyou digital experiment parking lot
0
0
no vote
Clock frequency division design
0
0
no vote
FIR filter based on FPGA
0
0
no vote
Cameralink modulation and demodulation source code
0
0
no vote
No comment