GSM_GPS with arduino
2016-08-23
0 0 0
no vote
Other
Earn points
The GSM library is included with Arduino IDE 1.0.4 and later.
With the Arduino GSM Shield, this library enables an Arduino board to do most of the operations you can do with a GSM phone: place and receive voice calls, send and receive SMS, and connect to the internet over a GPRS network.
The GSM shield has a modem that transfers data from a serial port to the GSM network. The modem executes operations via a series of AT commands. The library abstracts low level communications between the modem and SIM card. It relies on the Software Serial library for communication between the moden and Arduino.
Typically, each individual command is part of a larger series necessary to execute a particular function. The library can also receive information and return it to you when necessary.
With the Arduino GSM Shield, this library enables an Arduino board to do most of the operations you can do with a GSM phone: place and receive voice calls, send and receive SMS, and connect to the internet over a GPRS network.
The GSM shield has a modem that transfers data from a serial port to the GSM network. The modem executes operations via a series of AT commands. The library abstracts low level communications between the modem and SIM card. It relies on the Software Serial library for communication between the moden and Arduino.
Typically, each individual command is part of a larger series necessary to execute a particular function. The library can also receive information and return it to you when necessary.
c
arduinoGSMGPS
Related Source Codes
PClite
0
0
no vote
generic embeded FTP Client
0
0
no vote
UDP Test Demo
0
0
no vote
TMS320F28335 DSP transmits data to EEPROM through
0
0
no vote
TMS320F28335 CAN communication source code
0
0
no vote
No comment