MEMS_ARM_KEIL
2016-08-23
0 0 0
no vote
Other
Earn points
This example shows how to configure the MEMS accelerometre to detect acceleration X/Y axis
and to detect the click/double click on Z axis.
After startup the program checks the MEMS accelerometre status registers and behaves as follows:
1. If the board is moved the acceleration is detected on x/Y axis and LEDs toggles according to
the motion direction and speed.
2. If a click is detected on Z axis LED3 and LED6 toggles during 3s.
3. If a double click is detected on Z axis all LEDs toggles during 3s.
c
MEMSARMKEIL
Related Source Codes
PClite
0
0
no vote
generic embeded FTP Client
0
0
no vote
UDP Test Demo
0
0
no vote
TMS320F28335 DSP transmits data to EEPROM through
0
0
no vote
TMS320F28335 CAN communication source code
0
0
no vote
No comment