design and simulik boost converter
2016-08-23
1 0 0
no vote
Other
Earn points
The LTC3115-1 is a monolithic buck-boost converter that
can operate with input and output voltages from as low
as 2.7V to as high as 40V. Four internal low resistance Nchannel
DMOS switches minimize the size of the application
circuit and reduce power losses to maximize efficiency.
Internal high side gate drivers, which require only the
addition of two small external capacitors, further simplify
the design process. A proprietary switch control algorithm
allows the buck-boost converter to maintain output voltage
regulation with input voltages that are above, below
or equal to the output voltage. Transitions between these
operating modes are seamless and free of transients and
subharmonic switching. The LTC3115-1 can be configured
to operate over a wide range of switching frequencies, from
can operate with input and output voltages from as low
as 2.7V to as high as 40V. Four internal low resistance Nchannel
DMOS switches minimize the size of the application
circuit and reduce power losses to maximize efficiency.
Internal high side gate drivers, which require only the
addition of two small external capacitors, further simplify
the design process. A proprietary switch control algorithm
allows the buck-boost converter to maintain output voltage
regulation with input voltages that are above, below
or equal to the output voltage. Transitions between these
operating modes are seamless and free of transients and
subharmonic switching. The LTC3115-1 can be configured
to operate over a wide range of switching frequencies, from
matlab
Related Source Codes
GMSK Linear Receiver
0
0
no vote
NSGA-II algorithm
0
0
no vote
NSGA-III multi-objective optimization algorithm
0
0
no vote
Compressed sensing example
0
0
no vote
CFAR detector example
0
0
no vote
No comment