Single-Phase Rectifier
2016-08-23
1 0 0
no vote
Other
Earn points
This demonstration illustrates use of the Universal Bridge, Multimeter, and Discrete System blocks.
This system contains two identical circuits showing the operation of a single phase rectifier.
The rectifiers are fed by a 120 V/ 24 V linear transformer. The rectified voltage is filtered by a 100 mH / 200 uF filter and applied to a 5 ohm resistive load. The load voltages are measured by two Voltage Measurement blocks Vd1 and Vd2
This system contains two identical circuits showing the operation of a single phase rectifier.
The rectifiers are fed by a 120 V/ 24 V linear transformer. The rectified voltage is filtered by a 100 mH / 200 uF filter and applied to a 5 ohm resistive load. The load voltages are measured by two Voltage Measurement blocks Vd1 and Vd2
matlab
Related Source Codes
GMSK Linear Receiver
0
0
no vote
NSGA-II algorithm
0
0
no vote
NSGA-III multi-objective optimization algorithm
0
0
no vote
Compressed sensing example
0
0
no vote
CFAR detector example
0
0
no vote
No comment