active rectifier VSC and control is an American Su
2016-08-23
0 0 0
no vote
Other
Earn points
An Active Rectifier must be installed in a 60Hz 208V three-phase distribution system in
order to provide a high power quality 600V DC supply for a 150kW motor drive. The
active rectifier VSC and control is an American Superconductor (AMSC) PM-1000
Power Module with the Active Rectifier control option. The control block diagram and
parameters are attached. You must tune the control and design a simulation of the system
to validate your control tuning. Not all details are shown in the AMSC diagram,
therefore, some assumptions must be made. Assume that the active rectifier utilizes
single-update symmetrical SVPWM at 8kHz and simple PI control loops for the current
regulator in the synchronous reference frame. You may also use an idealized Phase
Locked Loop (PLL) and a DC bus resistor as a very simplified model of the load.
order to provide a high power quality 600V DC supply for a 150kW motor drive. The
active rectifier VSC and control is an American Superconductor (AMSC) PM-1000
Power Module with the Active Rectifier control option. The control block diagram and
parameters are attached. You must tune the control and design a simulation of the system
to validate your control tuning. Not all details are shown in the AMSC diagram,
therefore, some assumptions must be made. Assume that the active rectifier utilizes
single-update symmetrical SVPWM at 8kHz and simple PI control loops for the current
regulator in the synchronous reference frame. You may also use an idealized Phase
Locked Loop (PLL) and a DC bus resistor as a very simplified model of the load.
matlab
控制
整流器
美国
VSC
委员会
超导体
督导
电源模块
选项
下午
Related Source Codes
GMSK Linear Receiver
0
0
no vote
NSGA-II algorithm
0
0
no vote
NSGA-III multi-objective optimization algorithm
0
0
no vote
Compressed sensing example
0
0
no vote
CFAR detector example
0
0
no vote
No comment