Sort by
  1. Language:C++
  2. Category:Driver Development
  3. Time:ALL
  4. View:1000 times
Remove all
Language More Hide
Category More Hide
Time
View
More

C++TWAIN scanner driver

size:14px;">使用C++开发的扫描仪驱动,使用TWAIN协议,可以支持大部分主流的扫描仪。源工程太大且耦合多,把twain模块单独提炼出来,可以放到新添加工程中直接使用。可以通过函数接口设置扫描仪参数,启动停止扫描仪。...

C++usb routine HId

C++usb, HId, as a slave, PC HID communications program source code. Included with VS2005 Project 2010 files. USB communication is learning good routines. And the lower position machine can achieve control of the LED lights on the PC Board. ......

Basler camera display code

Pro if you have spent $ 10,000 on the Basler camera does not worry about it? Download my programs let you fix this annoyance. This program can support a dual-camera shows, the use of multithreading technology, compile under VS2008...

HID Client(VS2005, VS2010)

Stm32f4 as PC, PC HID communications program source code. Included with VS2005 Project 2010 files. USB communication is learning good routines. And the lower position machine can achieve control of the LED lights on the PC Board....

PLC driver development

device, read and write serial, belongs to company internal source, is has value, but not adapted latest of some PLC drive program, such as OMRON latest of NJ series PLC, now needs rewrite this aspects of drive network can mutual communication....

FT2232H USB to I2C interface

Protocol Synchronous Serial Engine (MPSSE) to make a USB to I2C bus interface using the FT2232H.  The executable application and full project code are provided. Requirements: This project is designed to run on Windows 2000 or Windows XP and requires FTDI's D2XX drivers to be installed....

USBHID device read/write source

Packaged USB HID driver, based on MFC, this version belongs to the debug version, might be having a little trouble, but test all HID devices can open and identify the inserted PC...

0.96 "OLED (SSD1306) for Arduino driver and 3D cube demo

family:Tahoma;font-size:6.5pt;">0.96" OLED (SSD1306) for arduino 驱动及3D立方体演示 能用I2C或SPI连接及控制,并且内带基本图形绘制函数:点,线,中空圆形,填充圆形,中空矩形,填充矩形..等 除了一般图形范例外,另外还附上仿3D图形的源码,...

NRF24L01 ARM driver

space:nowrap;font-size:14px;">NRF24L01 driver tested successfully by myself, and run on S3C2440 chips, no problem....

The OLED 驅 128X64 動 source 碼

driven paradigm, implement fully furnished apartments 128X64 SSD1306 驅 動 Obviously shows some basic image type. for example: rectangular, round, also obviously shown in English words...


LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D