misc.c ( File view )

  • By 昱晨 2015-04-27
  • View(s):8
  • Download(s):2
  • Point(s): 0
			/**
  ******************************************************************************
  * @file    misc.c
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   This file provides all the miscellaneous firmware functions (add-on
  *          to CMSIS functions).
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "misc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{

  */

/** @defgroup MISC 
  * @brief MISC driver modules
  * @{

  */

/** @defgroup MISC_Private_TypesDefinitions
  * @{

  */

/**
  * @
}
  */ 

/** @defgroup MISC_Private_Defines
  * @{

  */

#define AIRCR_VECTKEY_MASK    ((uint32_t)0x05FA0000)
/**
  * @
}
  */

/** @defgroup MISC_Private_Macros
  * @{

  */

/**
  * @
}
  */

/** @defgroup MISC_Private_Variables
  * @{

  */

/**
  * @
}
  */

/** @defgroup MISC_Private_FunctionPrototypes
  * @{

  */

/**
  * @
}
  */

/** @defgroup MISC_Private_Functions
  * @{

  */

/**
  * @brief  Configures the priority grouping: pre-emption priority and subpriority.
  * @param  NVIC_PriorityGroup: specifies the priority grouping bits length. 
  *   This parameter can be one of the following values:
  *     @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
  *                                4 bits for subpriority
  *     @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
  *                                3 bits for subpriority
  *     @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
  *                                2 bits for subpriority
  *     @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
  *                                1 bits for subpriority
  *     @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
  *                                0 bits for subpriority
  * @retval None
  */
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{

  /* Check the parameters */
  assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
  
  /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
  SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;

}

/**
  * @brief  Initializes the NVIC peripheral according to the specified
  *         parameters in the NVIC_InitStruct.
  * @param  NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
  *         the configuration information for the specified NVIC peripheral.
  * @retval None
  */
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
{

  uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
  
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
  assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));  
  assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
    
  if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
  {

    /* Compute the Corresponding IRQ Priority --------------------------------*/    
    tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
    tmppre = (0x4 - tmppriority);
    tmpsub = tmpsub >> tmppriority;

    tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
    tmppriority |=  NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
    tmppriority = tmppriority << 0x04;
        
    NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
    
    /* Enable the Selected IRQ Channels --------------------------------------*/
    NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
  
}
  else
  {

    /* Disable the Selected IRQ Channels -------------------------------------*/
    NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
  
}

}

/**
  * @brief  Sets the vector table location and Offset.
  * @param  NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
  *   This parameter can be one of the following values:
  *     @arg NVIC_VectTab_RAM
  *     @arg NVIC_VectTab_FLASH
  * @param  Offset: Vector Table base offset field. This value must be a multiple 
  *         of 0x200.
  * @retval None
  */
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
 
  /* Check the parameters */
  assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
  assert_param(IS_NVIC_OFFSET(Offset));  
   
  SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);

}

/**
  * @brief  Selects the condition for the system to enter low power mode.
  * @param  LowPowerMode: Specifies the new mode for the system to enter low power mode.
  *   This parameter can be one of the following values:
  *     @arg NVIC_LP_SEVONPEND
  *     @arg NVIC_LP_SLEEPDEEP
  *     @arg NVIC_LP_SLEEPONEXIT
  * @param  NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_NVIC_LP(LowPowerMode));
  assert_param(IS_FUNCTIONAL_STATE(NewState));  
  
  if (NewState != DISABLE)
  {

    SCB->SCR |= LowPowerMode;
  
}
  else
  {

    SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
  
}

}

/**
  * @brief  Configures the SysTick clock source.
  * @param  SysTick_CLKSource: specifies the SysTick clock source.
  *   This parameter can be one of the following values:
  *     @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
  *     @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
  * @retval None
  */
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{

  /* Check the parameters */
  assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
  if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
  {

    SysTick->CTRL |= SysTick_CLKSource_HCLK;
  
}
  else
  {

    SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
  
}

}

/**
  * @
}
  */

/**
  * @
}
  */

/**
  * @
}
  */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
			
...
Expand> <Close

Want complete source code? Download it here

Point(s): 0

Download
0 lines left, continue to read
Sponsored links

File list

Tips: You can preview the content of files by clicking file names^_^
Name Size Date
01.97 kB
01.97 kB
core_cm3.c16.87 kB2010-06-07 10:25
core_cm3.h83.71 kB2011-02-09 14:59
startup_stm32f10x_hd.s15.14 kB2011-03-10 10:52
stm32f10x.h619.08 kB2011-03-10 10:51
system_stm32f10x.c35.70 kB2011-03-10 10:51
system_stm32f10x.h2.04 kB2011-03-10 10:51
01.97 kB
01.97 kB
misc.h8.77 kB2011-03-10 10:47
stm32f10x_adc.h21.18 kB2011-03-10 10:47
stm32f10x_bkp.h7.38 kB2011-03-10 10:47
stm32f10x_can.h26.91 kB2011-03-10 10:47
stm32f10x_cec.h6.42 kB2011-03-10 10:47
stm32f10x_crc.h2.11 kB2011-03-10 10:47
stm32f10x_dac.h14.88 kB2011-03-10 10:47
stm32f10x_dbgmcu.h3.73 kB2011-03-10 10:47
stm32f10x_dma.h20.27 kB2011-03-10 10:47
stm32f10x_exti.h6.66 kB2011-03-10 10:47
stm32f10x_flash.h24.85 kB2011-03-10 10:47
stm32f10x_fsmc.h26.38 kB2011-03-10 10:47
stm32f10x_gpio.h19.70 kB2011-03-10 10:47
stm32f10x_i2c.h29.33 kB2011-03-10 10:47
stm32f10x_iwdg.h3.74 kB2011-03-10 10:47
stm32f10x_pwr.h4.28 kB2011-03-10 10:47
stm32f10x_rcc.h29.74 kB2011-03-10 10:47
stm32f10x_rtc.h3.77 kB2011-03-10 10:47
stm32f10x_sdio.h21.35 kB2011-03-10 10:47
stm32f10x_spi.h17.31 kB2011-03-10 10:47
stm32f10x_tim.h51.20 kB2011-03-10 10:47
stm32f10x_usart.h16.16 kB2011-03-10 10:47
stm32f10x_wwdg.h2.90 kB2011-03-10 10:47
01.97 kB
misc.c6.88 kB2011-03-10 10:47
stm32f10x_adc.c46.09 kB2011-03-10 10:47
stm32f10x_bkp.c8.26 kB2011-03-10 10:47
stm32f10x_can.c44.05 kB2011-03-10 10:47
stm32f10x_cec.c11.38 kB2011-03-10 10:47
stm32f10x_crc.c3.27 kB2011-03-10 10:47
stm32f10x_dac.c18.64 kB2011-03-10 10:47
stm32f10x_dbgmcu.c5.03 kB2011-03-10 10:47
stm32f10x_dma.c28.91 kB2011-03-10 10:47
stm32f10x_exti.c6.80 kB2011-03-10 10:47
stm32f10x_flash.c61.08 kB2011-03-10 10:47
stm32f10x_fsmc.c34.65 kB2011-03-10 10:47
stm32f10x_gpio.c22.68 kB2011-03-11 17:43
stm32f10x_i2c.c44.71 kB2011-03-10 10:47
stm32f10x_iwdg.c4.80 kB2011-03-10 10:47
stm32f10x_pwr.c8.55 kB2011-03-10 10:47
stm32f10x_rcc.c50.07 kB2011-03-10 10:47
stm32f10x_rtc.c8.40 kB2011-03-10 10:47
stm32f10x_sdio.c28.25 kB2011-03-10 10:47
stm32f10x_spi.c29.52 kB2011-03-10 10:47
stm32f10x_tim.c106.60 kB2011-03-10 10:47
stm32f10x_usart.c37.41 kB2011-03-10 10:47
stm32f10x_wwdg.c5.60 kB2011-03-10 10:47
01.97 kB
01.97 kB
systick.hex18.40 kB2013-08-15 19:23
01.97 kB
I2C_MPU6050.c4.69 kB2013-08-15 19:23
I2C_MPU6050.h1.13 kB2013-08-15 19:10
I2C_MPU6050.uvgui.Orange131.20 kB2013-08-15 19:25
I2C_MPU6050.uvgui.flyleaf66.57 kB2012-06-25 20:54
I2C_MPU6050.uvopt10.45 kB2013-08-15 19:25
I2C_MPU6050.uvproj16.56 kB2013-08-15 19:00
JLink497.00 B2012-06-25 20:12
JLinkSettings.ini375.00 B2012-06-24 14:45
delay.c177.00 B2011-08-10 16:44
delay.h98.00 B2011-08-08 21:03
main.c1.48 kB2013-08-15 19:11
stm32f10x_conf.h3.22 kB2012-06-24 22:12
stm32f10x_it.c4.30 kB2011-04-04 19:03
stm32f10x_it.h2.04 kB2011-04-04 19:03
usart1.c5.33 kB2013-08-15 14:40
usart1.h234.00 B2011-08-05 21:11
keilkilll.bat399.00 B2011-04-23 10:24
...
Sponsored links

misc.c (294.78 kB)

Need 0 point
Your Point(s)
Download Download

Download failed? Click here to download one by one.

Tip: this source code project contains 2 packages, please click the allow button on the browser pop-up dialog,after you click the download button.

▪ Click to download this source code directly

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D