stm32f10x.h ( File view )

  • By 昱晨 2015-04-27
  • View(s):8
  • Download(s):2
  • Point(s): 0
			/**
  ******************************************************************************
  * @file    stm32f10x.h
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer Header File. 
  *          This file contains all the peripheral register's definitions, bits 
  *          definitions and memory mapping for STM32F10x Connectivity line, 
  *          High density, High density value line, Medium density, 
  *          Medium density Value line, Low density, Low density Value line 
  *          and XL-density devices.
  *
  *          The file is the unique include file that the application programmer
  *          is using in the C source code, usually in main.c. This file contains:
  *           - Configuration section that allows to select:
  *              - The device used in the target application
  *              - To use or not the peripherals drivers in application code(i.e. 
  *                code will be based on direct access to peripherals registers 
  *                rather than drivers API), this option is controlled by 
  *                "#define USE_STDPERIPH_DRIVER"
  *              - To change few application-specific parameters such as the HSE 
  *                crystal frequency
  *           - Data structures and the address mapping for all peripherals
  *           - Peripheral's registers declarations and bits definition
  *           - Macros to access peripherals registers hardware
  *
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * 

© COPYRIGHT 2011 STMicroelectronics

****************************************************************************** */ /** @addtogroup CMSIS * @{ */ /** @addtogroup stm32f10x * @{ */ #ifndef __STM32F10x_H #define __STM32F10x_H #ifdef __cplusplus extern "C" { #endif /** @addtogroup Library_configuration_section * @{ */ /* Uncomment the line below according to the target STM32 device used in your application */ #if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */ /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ #endif /* Tip: To avoid modifying this file each time you need to switch between these devices, you can define the device in your toolchain compiler preprocessor. - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - Low-density value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - Medium-density value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - High-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. - High-density value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 512 and 1024 Kbytes. - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. */ #if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" #endif #if !defined USE_STDPERIPH_DRIVER /** * @brief Comment the line below if you will not use the peripherals drivers. In this case, these drivers will not be included and the application code will be based on direct access to peripherals registers */ /*#define USE_STDPERIPH_DRIVER*/ #endif /** * @brief In the following line adjust the value of External High Speed oscillator (HSE) used in your application Tip: To avoid modifying this file each time you need to use different HSE, you can define the HSE value in your toolchain compiler preprocessor. */ #if !defined HSE_VALUE #ifdef STM32F10X_CL #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ #else #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ #endif /* STM32F10X_CL */ #endif /* HSE_VALUE */ /** * @brief In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value */ #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ /** * @brief STM32F10x Standard Peripheral Library version number */ #define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ #define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ #define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ #define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ #define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ |(__STM32F10X_STDPERIPH_VERSION_RC)) /** * @ } */ /** @addtogroup Configuration_section_for_CMSIS * @{ */ /** * @brief Configuration of the Cortex-M3 Processor and Core Peripherals */ #ifdef STM32F10X_XL #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ #else #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ #endif /* STM32F10X_XL */ #define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /** * @brief STM32F10x Interrupt Number Definition, according to the selected device * in @ref Library_configuration_section */ typedef enum IRQn { /****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ /****** STM32 specific Interrupt Numbers *********************************************************/ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ TAMPER_IRQn = 2, /*!< Tamper Interrupt */ RTC_IRQn = 3, /*!< RTC global Interrupt */ FLASH_IRQn = 4, /*!< FLASH global Interrupt */ RCC_IRQn = 5, /*!< RCC global Interrupt */ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ DMA1_Chan ... ... (Not finished, please download and read the complete file)
...
Expand> <Close

Want complete source code? Download it here

Point(s): 0

Download
0 lines left, continue to read
Sponsored links

File list

Tips: You can preview the content of files by clicking file names^_^
Name Size Date
01.97 kB
01.97 kB
core_cm3.c16.87 kB2010-06-07 10:25
core_cm3.h83.71 kB2011-02-09 14:59
startup_stm32f10x_hd.s15.14 kB2011-03-10 10:52
stm32f10x.h619.08 kB2011-03-10 10:51
system_stm32f10x.c35.70 kB2011-03-10 10:51
system_stm32f10x.h2.04 kB2011-03-10 10:51
01.97 kB
01.97 kB
misc.h8.77 kB2011-03-10 10:47
stm32f10x_adc.h21.18 kB2011-03-10 10:47
stm32f10x_bkp.h7.38 kB2011-03-10 10:47
stm32f10x_can.h26.91 kB2011-03-10 10:47
stm32f10x_cec.h6.42 kB2011-03-10 10:47
stm32f10x_crc.h2.11 kB2011-03-10 10:47
stm32f10x_dac.h14.88 kB2011-03-10 10:47
stm32f10x_dbgmcu.h3.73 kB2011-03-10 10:47
stm32f10x_dma.h20.27 kB2011-03-10 10:47
stm32f10x_exti.h6.66 kB2011-03-10 10:47
stm32f10x_flash.h24.85 kB2011-03-10 10:47
stm32f10x_fsmc.h26.38 kB2011-03-10 10:47
stm32f10x_gpio.h19.70 kB2011-03-10 10:47
stm32f10x_i2c.h29.33 kB2011-03-10 10:47
stm32f10x_iwdg.h3.74 kB2011-03-10 10:47
stm32f10x_pwr.h4.28 kB2011-03-10 10:47
stm32f10x_rcc.h29.74 kB2011-03-10 10:47
stm32f10x_rtc.h3.77 kB2011-03-10 10:47
stm32f10x_sdio.h21.35 kB2011-03-10 10:47
stm32f10x_spi.h17.31 kB2011-03-10 10:47
stm32f10x_tim.h51.20 kB2011-03-10 10:47
stm32f10x_usart.h16.16 kB2011-03-10 10:47
stm32f10x_wwdg.h2.90 kB2011-03-10 10:47
01.97 kB
misc.c6.88 kB2011-03-10 10:47
stm32f10x_adc.c46.09 kB2011-03-10 10:47
stm32f10x_bkp.c8.26 kB2011-03-10 10:47
stm32f10x_can.c44.05 kB2011-03-10 10:47
stm32f10x_cec.c11.38 kB2011-03-10 10:47
stm32f10x_crc.c3.27 kB2011-03-10 10:47
stm32f10x_dac.c18.64 kB2011-03-10 10:47
stm32f10x_dbgmcu.c5.03 kB2011-03-10 10:47
stm32f10x_dma.c28.91 kB2011-03-10 10:47
stm32f10x_exti.c6.80 kB2011-03-10 10:47
stm32f10x_flash.c61.08 kB2011-03-10 10:47
stm32f10x_fsmc.c34.65 kB2011-03-10 10:47
stm32f10x_gpio.c22.68 kB2011-03-11 17:43
stm32f10x_i2c.c44.71 kB2011-03-10 10:47
stm32f10x_iwdg.c4.80 kB2011-03-10 10:47
stm32f10x_pwr.c8.55 kB2011-03-10 10:47
stm32f10x_rcc.c50.07 kB2011-03-10 10:47
stm32f10x_rtc.c8.40 kB2011-03-10 10:47
stm32f10x_sdio.c28.25 kB2011-03-10 10:47
stm32f10x_spi.c29.52 kB2011-03-10 10:47
stm32f10x_tim.c106.60 kB2011-03-10 10:47
stm32f10x_usart.c37.41 kB2011-03-10 10:47
stm32f10x_wwdg.c5.60 kB2011-03-10 10:47
01.97 kB
01.97 kB
systick.hex18.40 kB2013-08-15 19:23
01.97 kB
I2C_MPU6050.c4.69 kB2013-08-15 19:23
I2C_MPU6050.h1.13 kB2013-08-15 19:10
I2C_MPU6050.uvgui.Orange131.20 kB2013-08-15 19:25
I2C_MPU6050.uvgui.flyleaf66.57 kB2012-06-25 20:54
I2C_MPU6050.uvopt10.45 kB2013-08-15 19:25
I2C_MPU6050.uvproj16.56 kB2013-08-15 19:00
JLink497.00 B2012-06-25 20:12
JLinkSettings.ini375.00 B2012-06-24 14:45
delay.c177.00 B2011-08-10 16:44
delay.h98.00 B2011-08-08 21:03
main.c1.48 kB2013-08-15 19:11
stm32f10x_conf.h3.22 kB2012-06-24 22:12
stm32f10x_it.c4.30 kB2011-04-04 19:03
stm32f10x_it.h2.04 kB2011-04-04 19:03
usart1.c5.33 kB2013-08-15 14:40
usart1.h234.00 B2011-08-05 21:11
keilkilll.bat399.00 B2011-04-23 10:24
...
Sponsored links

stm32f10x.h (294.78 kB)

Need 0 point
Your Point(s)
Download Download

Download failed? Click here to download one by one.

Tip: this source code project contains 2 packages, please click the allow button on the browser pop-up dialog,after you click the download button.

▪ Click to download this source code directly

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D