Home » Source Code » MPU6050 (hardware IIC) » stm32f10x_dac.c

stm32f10x_dac.c ( File view )

  • By 昱晨 2015-04-27
  • View(s):8
  • Download(s):2
  • Point(s): 0
			/**
  ******************************************************************************
  * @file    stm32f10x_dac.c
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   This file provides all the DAC firmware functions.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dac.h"
#include "stm32f10x_rcc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{

  */

/** @defgroup DAC 
  * @brief DAC driver modules
  * @{

  */ 

/** @defgroup DAC_Private_TypesDefinitions
  * @{

  */

/**
  * @
}
  */

/** @defgroup DAC_Private_Defines
  * @{

  */

/* CR register Mask */
#define CR_CLEAR_MASK              ((uint32_t)0x00000FFE)

/* DAC Dual Channels SWTRIG masks */
#define DUAL_SWTRIG_SET            ((uint32_t)0x00000003)
#define DUAL_SWTRIG_RESET          ((uint32_t)0xFFFFFFFC)

/* DHR registers offsets */
#define DHR12R1_OFFSET             ((uint32_t)0x00000008)
#define DHR12R2_OFFSET             ((uint32_t)0x00000014)
#define DHR12RD_OFFSET             ((uint32_t)0x00000020)

/* DOR register offset */
#define DOR_OFFSET                 ((uint32_t)0x0000002C)
/**
  * @
}
  */

/** @defgroup DAC_Private_Macros
  * @{

  */

/**
  * @
}
  */

/** @defgroup DAC_Private_Variables
  * @{

  */

/**
  * @
}
  */

/** @defgroup DAC_Private_FunctionPrototypes
  * @{

  */

/**
  * @
}
  */

/** @defgroup DAC_Private_Functions
  * @{

  */

/**
  * @brief  Deinitializes the DAC peripheral registers to their default reset values.
  * @param  None
  * @retval None
  */
void DAC_DeInit(void)
{

  /* Enable DAC reset state */
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
  /* Release DAC from reset state */
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);

}

/**
  * @brief  Initializes the DAC peripheral according to the specified 
  *         parameters in the DAC_InitStruct.
  * @param  DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  *     @arg DAC_Channel_1: DAC Channel1 selected
  *     @arg DAC_Channel_2: DAC Channel2 selected
  * @param  DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
  *        contains the configuration information for the specified DAC channel.
  * @retval None
  */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
{

  uint32_t tmpreg1 = 0, tmpreg2 = 0;
  /* Check the DAC parameters */
  assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
  assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
  assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
/*---------------------------- DAC CR Configuration --------------------------*/
  /* Get the DAC CR value */
  tmpreg1 = DAC->CR;
  /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
  tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
  /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
     mask/amplitude for wave generation */
  /* Set TSELx and TENx bits according to DAC_Trigger value */
  /* Set WAVEx bits according to DAC_WaveGeneration value */
  /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ 
  /* Set BOFFx bit according to DAC_OutputBuffer value */   
  tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
             DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
  /* Calculate CR register value depending on DAC_Channel */
  tmpreg1 |= tmpreg2 << DAC_Channel;
  /* Write to DAC CR */
  DAC->CR = tmpreg1;

}

/**
  * @brief  Fills each DAC_InitStruct member with its default value.
  * @param  DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
  *         be initialized.
  * @retval None
  */
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
{

/*--------------- Reset DAC init structure parameters values -----------------*/
  /* Initialize the DAC_Trigger member */
  DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
  /* Initialize the DAC_WaveGeneration member */
  DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
  /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
  DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
  /* Initialize the DAC_OutputBuffer member */
  DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;

}

/**
  * @brief  Enables or disables the specified DAC channel.
  * @param  DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  *     @arg DAC_Channel_1: DAC Channel1 selected
  *     @arg DAC_Channel_2: DAC Channel2 selected
  * @param  NewState: new state of the DAC channel. 
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {

    /* Enable the selected DAC channel */
    DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
  
}
  else
  {

    /* Disable the selected DAC channel */
    DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
  
}

}
#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
/**
  * @brief  Enables or disables the specified DAC interrupts.
  * @param  DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  *     @arg DAC_Channel_1: DAC Channel1 selected
  *     @arg DAC_Channel_2: DAC Channel2 selected
  * @param  DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. 
  *   This parameter can be the following values:
  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                      
  * @param  NewState: new state of the specified DAC interrupts.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */ 
void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)  
{

  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  assert_param(IS_DAC_IT(DAC_IT)); 

  if (NewState != DISABLE)
  {

    /* Enable the selected DAC interrupts */
    DAC->CR |=  (DAC_IT << DAC_Channel);
  
}
  else
  {

    /* Disable the selected DAC interrupts */
    DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
  
}

}
#endif

/**
  * @brief  Enables or disables the specified DAC channel DMA request.
  * @param  DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  *     @arg DAC_Channel_1: DAC Channel1 selected
  *     @arg DAC_Channel_2: DAC Channel2 selected
  * @param  NewState: new state of the selected DAC channel DMA request.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {

    /* Enable the selected DAC channel DMA request */
    DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
  
}
  else
  {

    /* Disable the selected DAC channel DMA request */
    DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
  
}

}

/**
  * @brief  Enables or disables the selected DAC channel software trigger.
  * @param  DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  *     @arg DAC_Channel_1: DAC Channel1 selected
  *     @arg DAC_Channel_2: DAC Channel2 selected
  * @param  NewState: new state of the selected DAC channel software trigger.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {

    /* Enable software trigger for the selected DAC channel */
    DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
  
}
  else
  {

    /* Disable software trigger for the selected DAC channel */
    DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
  
}

}

/**
  * @brief  Enables or disables simultaneously the two DAC channels software
  *   triggers.
  * @param  NewState: new state of the DAC channels software triggers.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {

    /* Enable software trigger for both DAC channels */
    DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
  
}
  else
  {

    /* Disable software trigger for both DAC channels */
    DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
  
}

}

/**
  * @brief  Enables or disables the selected DAC channel wave generation.
  * @param  DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  *     @arg DAC_Channel_1: DAC Channel1 selected
  *     @arg DAC_Channel_2: DAC Channel2 selecte
...
...
(Not finished, please download and read the complete file)
			
...
Expand> <Close

Want complete source code? Download it here

Point(s): 0

Download
0 lines left, continue to read
Sponsored links

File list

Tips: You can preview the content of files by clicking file names^_^
Name Size Date
01.97 kB
01.97 kB
core_cm3.c16.87 kB2010-06-07 10:25
core_cm3.h83.71 kB2011-02-09 14:59
startup_stm32f10x_hd.s15.14 kB2011-03-10 10:52
stm32f10x.h619.08 kB2011-03-10 10:51
system_stm32f10x.c35.70 kB2011-03-10 10:51
system_stm32f10x.h2.04 kB2011-03-10 10:51
01.97 kB
01.97 kB
misc.h8.77 kB2011-03-10 10:47
stm32f10x_adc.h21.18 kB2011-03-10 10:47
stm32f10x_bkp.h7.38 kB2011-03-10 10:47
stm32f10x_can.h26.91 kB2011-03-10 10:47
stm32f10x_cec.h6.42 kB2011-03-10 10:47
stm32f10x_crc.h2.11 kB2011-03-10 10:47
stm32f10x_dac.h14.88 kB2011-03-10 10:47
stm32f10x_dbgmcu.h3.73 kB2011-03-10 10:47
stm32f10x_dma.h20.27 kB2011-03-10 10:47
stm32f10x_exti.h6.66 kB2011-03-10 10:47
stm32f10x_flash.h24.85 kB2011-03-10 10:47
stm32f10x_fsmc.h26.38 kB2011-03-10 10:47
stm32f10x_gpio.h19.70 kB2011-03-10 10:47
stm32f10x_i2c.h29.33 kB2011-03-10 10:47
stm32f10x_iwdg.h3.74 kB2011-03-10 10:47
stm32f10x_pwr.h4.28 kB2011-03-10 10:47
stm32f10x_rcc.h29.74 kB2011-03-10 10:47
stm32f10x_rtc.h3.77 kB2011-03-10 10:47
stm32f10x_sdio.h21.35 kB2011-03-10 10:47
stm32f10x_spi.h17.31 kB2011-03-10 10:47
stm32f10x_tim.h51.20 kB2011-03-10 10:47
stm32f10x_usart.h16.16 kB2011-03-10 10:47
stm32f10x_wwdg.h2.90 kB2011-03-10 10:47
01.97 kB
misc.c6.88 kB2011-03-10 10:47
stm32f10x_adc.c46.09 kB2011-03-10 10:47
stm32f10x_bkp.c8.26 kB2011-03-10 10:47
stm32f10x_can.c44.05 kB2011-03-10 10:47
stm32f10x_cec.c11.38 kB2011-03-10 10:47
stm32f10x_crc.c3.27 kB2011-03-10 10:47
stm32f10x_dac.c18.64 kB2011-03-10 10:47
stm32f10x_dbgmcu.c5.03 kB2011-03-10 10:47
stm32f10x_dma.c28.91 kB2011-03-10 10:47
stm32f10x_exti.c6.80 kB2011-03-10 10:47
stm32f10x_flash.c61.08 kB2011-03-10 10:47
stm32f10x_fsmc.c34.65 kB2011-03-10 10:47
stm32f10x_gpio.c22.68 kB2011-03-11 17:43
stm32f10x_i2c.c44.71 kB2011-03-10 10:47
stm32f10x_iwdg.c4.80 kB2011-03-10 10:47
stm32f10x_pwr.c8.55 kB2011-03-10 10:47
stm32f10x_rcc.c50.07 kB2011-03-10 10:47
stm32f10x_rtc.c8.40 kB2011-03-10 10:47
stm32f10x_sdio.c28.25 kB2011-03-10 10:47
stm32f10x_spi.c29.52 kB2011-03-10 10:47
stm32f10x_tim.c106.60 kB2011-03-10 10:47
stm32f10x_usart.c37.41 kB2011-03-10 10:47
stm32f10x_wwdg.c5.60 kB2011-03-10 10:47
01.97 kB
01.97 kB
systick.hex18.40 kB2013-08-15 19:23
01.97 kB
I2C_MPU6050.c4.69 kB2013-08-15 19:23
I2C_MPU6050.h1.13 kB2013-08-15 19:10
I2C_MPU6050.uvgui.Orange131.20 kB2013-08-15 19:25
I2C_MPU6050.uvgui.flyleaf66.57 kB2012-06-25 20:54
I2C_MPU6050.uvopt10.45 kB2013-08-15 19:25
I2C_MPU6050.uvproj16.56 kB2013-08-15 19:00
JLink497.00 B2012-06-25 20:12
JLinkSettings.ini375.00 B2012-06-24 14:45
delay.c177.00 B2011-08-10 16:44
delay.h98.00 B2011-08-08 21:03
main.c1.48 kB2013-08-15 19:11
stm32f10x_conf.h3.22 kB2012-06-24 22:12
stm32f10x_it.c4.30 kB2011-04-04 19:03
stm32f10x_it.h2.04 kB2011-04-04 19:03
usart1.c5.33 kB2013-08-15 14:40
usart1.h234.00 B2011-08-05 21:11
keilkilll.bat399.00 B2011-04-23 10:24
...
Sponsored links

stm32f10x_dac.c (294.78 kB)

Need 0 point
Your Point(s)
Download Download

Download failed? Click here to download one by one.

Tip: this source code project contains 2 packages, please click the allow button on the browser pop-up dialog,after you click the download button.

▪ Click to download this source code directly

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D