Home » Source Code » MPU6050 (hardware IIC) » stm32f10x_pwr.c

stm32f10x_pwr.c ( File view )

  • By 昱晨 2015-04-27
  • View(s):8
  • Download(s):2
  • Point(s): 0
			/**
  ******************************************************************************
  * @file    stm32f10x_pwr.c
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   This file provides all the PWR firmware functions.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_pwr.h"
#include "stm32f10x_rcc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{

  */

/** @defgroup PWR 
  * @brief PWR driver modules
  * @{

  */ 

/** @defgroup PWR_Private_TypesDefinitions
  * @{

  */

/**
  * @
}
  */

/** @defgroup PWR_Private_Defines
  * @{

  */

/* --------- PWR registers bit address in the alias region ---------- */
#define PWR_OFFSET               (PWR_BASE - PERIPH_BASE)

/* --- CR Register ---*/

/* Alias word address of DBP bit */
#define CR_OFFSET                (PWR_OFFSET + 0x00)
#define DBP_BitNumber            0x08
#define CR_DBP_BB                (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))

/* Alias word address of PVDE bit */
#define PVDE_BitNumber           0x04
#define CR_PVDE_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))

/* --- CSR Register ---*/

/* Alias word address of EWUP bit */
#define CSR_OFFSET               (PWR_OFFSET + 0x04)
#define EWUP_BitNumber           0x08
#define CSR_EWUP_BB              (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))

/* ------------------ PWR registers bit mask ------------------------ */

/* CR register bit mask */
#define CR_DS_MASK               ((uint32_t)0xFFFFFFFC)
#define CR_PLS_MASK              ((uint32_t)0xFFFFFF1F)


/**
  * @
}
  */

/** @defgroup PWR_Private_Macros
  * @{

  */

/**
  * @
}
  */

/** @defgroup PWR_Private_Variables
  * @{

  */

/**
  * @
}
  */

/** @defgroup PWR_Private_FunctionPrototypes
  * @{

  */

/**
  * @
}
  */

/** @defgroup PWR_Private_Functions
  * @{

  */

/**
  * @brief  Deinitializes the PWR peripheral registers to their default reset values.
  * @param  None
  * @retval None
  */
void PWR_DeInit(void)
{

  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);

}

/**
  * @brief  Enables or disables access to the RTC and backup registers.
  * @param  NewState: new state of the access to the RTC and backup registers.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_BackupAccessCmd(FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;

}

/**
  * @brief  Enables or disables the Power Voltage Detector(PVD).
  * @param  NewState: new state of the PVD.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_PVDCmd(FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;

}

/**
  * @brief  Configures the voltage threshold detected by the Power Voltage Detector(PVD).
  * @param  PWR_PVDLevel: specifies the PVD detection level
  *   This parameter can be one of the following values:
  *     @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
  *     @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
  *     @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
  *     @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
  *     @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
  *     @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
  *     @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
  *     @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
  * @retval None
  */
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
{

  uint32_t tmpreg = 0;
  /* Check the parameters */
  assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
  tmpreg = PWR->CR;
  /* Clear PLS[7:5] bits */
  tmpreg &= CR_PLS_MASK;
  /* Set PLS[7:5] bits according to PWR_PVDLevel value */
  tmpreg |= PWR_PVDLevel;
  /* Store the new value */
  PWR->CR = tmpreg;

}

/**
  * @brief  Enables or disables the WakeUp Pin functionality.
  * @param  NewState: new state of the WakeUp Pin functionality.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_WakeUpPinCmd(FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;

}

/**
  * @brief  Enters STOP mode.
  * @param  PWR_Regulator: specifies the regulator state in STOP mode.
  *   This parameter can be one of the following values:
  *     @arg PWR_Regulator_ON: STOP mode with regulator ON
  *     @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
  * @param  PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
  *   This parameter can be one of the following values:
  *     @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
  *     @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
  * @retval None
  */
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
{

  uint32_t tmpreg = 0;
  /* Check the parameters */
  assert_param(IS_PWR_REGULATOR(PWR_Regulator));
  assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
  
  /* Select the regulator state in STOP mode ---------------------------------*/
  tmpreg = PWR->CR;
  /* Clear PDDS and LPDS bits */
  tmpreg &= CR_DS_MASK;
  /* Set LPDS bit according to PWR_Regulator value */
  tmpreg |= PWR_Regulator;
  /* Store the new value */
  PWR->CR = tmpreg;
  /* Set SLEEPDEEP bit of Cortex System Control Register */
  SCB->SCR |= SCB_SCR_SLEEPDEEP;
  
  /* Select STOP mode entry --------------------------------------------------*/
  if(PWR_STOPEntry == PWR_STOPEntry_WFI)
  {
   
    /* Request Wait For Interrupt */
    __WFI();
  
}
  else
  {

    /* Request Wait For Event */
    __WFE();
  
}
  
  /* Reset SLEEPDEEP bit of Cortex System Control Register */
  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);  

}

/**
  * @brief  Enters STANDBY mode.
  * @param  None
  * @retval None
  */
void PWR_EnterSTANDBYMode(void)
{

  /* Clear Wake-up flag */
  PWR->CR |= PWR_CR_CWUF;
  /* Select STANDBY mode */
  PWR->CR |= PWR_CR_PDDS;
  /* Set SLEEPDEEP bit of Cortex System Control Register */
  SCB->SCR |= SCB_SCR_SLEEPDEEP;
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM   )
  __force_stores();
#endif
  /* Request Wait For Interrupt */
  __WFI();

}

/**
  * @brief  Checks whether the specified PWR flag is set or not.
  * @param  PWR_FLAG: specifies the flag to check.
  *   This parameter can be one of the following values:
  *     @arg PWR_FLAG_WU: Wake Up flag
  *     @arg PWR_FLAG_SB: StandBy flag
  *     @arg PWR_FLAG_PVDO: PVD Output
  * @retval The new state of PWR_FLAG (SET or RESET).
  */
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
{

  FlagStatus bitstatus = RESET;
  /* Check the parameters */
  assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
  
  if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
  {

    bitstatus = SET;
  
}
  else
  {

    bitstatus = RESET;
  
}
  /* Return the flag status */
  return bitstatus;

}

/**
  * @brief  Clears the PWR's pending flags.
  * @param  PWR_FLAG: specifies the flag to clear.
  *   This parameter can be one of the following values:
  *     @arg PWR_FLAG_WU: Wake Up flag
  *     @arg PWR_FLAG_SB: StandBy flag
  * @retval None
  */
void PWR_ClearFlag(uint32_t PWR_FLAG)
{

  /* Check the parameters */
  assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
         
  PWR->CR |=  PWR_FLAG << 2;

}

/**
  * @
}
  */

/**
  * @
}
  */

/**
  * @
}
  */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
			
...
Expand> <Close

Want complete source code? Download it here

Point(s): 0

Download
0 lines left, continue to read
Sponsored links

File list

Tips: You can preview the content of files by clicking file names^_^
Name Size Date
01.97 kB
01.97 kB
core_cm3.c16.87 kB2010-06-07 10:25
core_cm3.h83.71 kB2011-02-09 14:59
startup_stm32f10x_hd.s15.14 kB2011-03-10 10:52
stm32f10x.h619.08 kB2011-03-10 10:51
system_stm32f10x.c35.70 kB2011-03-10 10:51
system_stm32f10x.h2.04 kB2011-03-10 10:51
01.97 kB
01.97 kB
misc.h8.77 kB2011-03-10 10:47
stm32f10x_adc.h21.18 kB2011-03-10 10:47
stm32f10x_bkp.h7.38 kB2011-03-10 10:47
stm32f10x_can.h26.91 kB2011-03-10 10:47
stm32f10x_cec.h6.42 kB2011-03-10 10:47
stm32f10x_crc.h2.11 kB2011-03-10 10:47
stm32f10x_dac.h14.88 kB2011-03-10 10:47
stm32f10x_dbgmcu.h3.73 kB2011-03-10 10:47
stm32f10x_dma.h20.27 kB2011-03-10 10:47
stm32f10x_exti.h6.66 kB2011-03-10 10:47
stm32f10x_flash.h24.85 kB2011-03-10 10:47
stm32f10x_fsmc.h26.38 kB2011-03-10 10:47
stm32f10x_gpio.h19.70 kB2011-03-10 10:47
stm32f10x_i2c.h29.33 kB2011-03-10 10:47
stm32f10x_iwdg.h3.74 kB2011-03-10 10:47
stm32f10x_pwr.h4.28 kB2011-03-10 10:47
stm32f10x_rcc.h29.74 kB2011-03-10 10:47
stm32f10x_rtc.h3.77 kB2011-03-10 10:47
stm32f10x_sdio.h21.35 kB2011-03-10 10:47
stm32f10x_spi.h17.31 kB2011-03-10 10:47
stm32f10x_tim.h51.20 kB2011-03-10 10:47
stm32f10x_usart.h16.16 kB2011-03-10 10:47
stm32f10x_wwdg.h2.90 kB2011-03-10 10:47
01.97 kB
misc.c6.88 kB2011-03-10 10:47
stm32f10x_adc.c46.09 kB2011-03-10 10:47
stm32f10x_bkp.c8.26 kB2011-03-10 10:47
stm32f10x_can.c44.05 kB2011-03-10 10:47
stm32f10x_cec.c11.38 kB2011-03-10 10:47
stm32f10x_crc.c3.27 kB2011-03-10 10:47
stm32f10x_dac.c18.64 kB2011-03-10 10:47
stm32f10x_dbgmcu.c5.03 kB2011-03-10 10:47
stm32f10x_dma.c28.91 kB2011-03-10 10:47
stm32f10x_exti.c6.80 kB2011-03-10 10:47
stm32f10x_flash.c61.08 kB2011-03-10 10:47
stm32f10x_fsmc.c34.65 kB2011-03-10 10:47
stm32f10x_gpio.c22.68 kB2011-03-11 17:43
stm32f10x_i2c.c44.71 kB2011-03-10 10:47
stm32f10x_iwdg.c4.80 kB2011-03-10 10:47
stm32f10x_pwr.c8.55 kB2011-03-10 10:47
stm32f10x_rcc.c50.07 kB2011-03-10 10:47
stm32f10x_rtc.c8.40 kB2011-03-10 10:47
stm32f10x_sdio.c28.25 kB2011-03-10 10:47
stm32f10x_spi.c29.52 kB2011-03-10 10:47
stm32f10x_tim.c106.60 kB2011-03-10 10:47
stm32f10x_usart.c37.41 kB2011-03-10 10:47
stm32f10x_wwdg.c5.60 kB2011-03-10 10:47
01.97 kB
01.97 kB
systick.hex18.40 kB2013-08-15 19:23
01.97 kB
I2C_MPU6050.c4.69 kB2013-08-15 19:23
I2C_MPU6050.h1.13 kB2013-08-15 19:10
I2C_MPU6050.uvgui.Orange131.20 kB2013-08-15 19:25
I2C_MPU6050.uvgui.flyleaf66.57 kB2012-06-25 20:54
I2C_MPU6050.uvopt10.45 kB2013-08-15 19:25
I2C_MPU6050.uvproj16.56 kB2013-08-15 19:00
JLink497.00 B2012-06-25 20:12
JLinkSettings.ini375.00 B2012-06-24 14:45
delay.c177.00 B2011-08-10 16:44
delay.h98.00 B2011-08-08 21:03
main.c1.48 kB2013-08-15 19:11
stm32f10x_conf.h3.22 kB2012-06-24 22:12
stm32f10x_it.c4.30 kB2011-04-04 19:03
stm32f10x_it.h2.04 kB2011-04-04 19:03
usart1.c5.33 kB2013-08-15 14:40
usart1.h234.00 B2011-08-05 21:11
keilkilll.bat399.00 B2011-04-23 10:24
...
Sponsored links

stm32f10x_pwr.c (294.78 kB)

Need 0 point
Your Point(s)
Download Download

Download failed? Click here to download one by one.

Tip: this source code project contains 2 packages, please click the allow button on the browser pop-up dialog,after you click the download button.

▪ Click to download this source code directly

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D