Home » Source Code » MPU6050 (hardware IIC) » stm32f10x_rtc.c

stm32f10x_rtc.c ( File view )

  • By 昱晨 2015-04-27
  • View(s):8
  • Download(s):2
  • Point(s): 0
			/**
  ******************************************************************************
  * @file    stm32f10x_rtc.c
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   This file provides all the RTC firmware functions.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_rtc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{

  */

/** @defgroup RTC 
  * @brief RTC driver modules
  * @{

  */

/** @defgroup RTC_Private_TypesDefinitions
  * @{

  */ 
/**
  * @
}
  */

/** @defgroup RTC_Private_Defines
  * @{

  */
#define RTC_LSB_MASK     ((uint32_t)0x0000FFFF)  /*!< RTC LSB Mask */
#define PRLH_MSB_MASK    ((uint32_t)0x000F0000)  /*!< RTC Prescaler MSB Mask */

/**
  * @
}
  */

/** @defgroup RTC_Private_Macros
  * @{

  */

/**
  * @
}
  */

/** @defgroup RTC_Private_Variables
  * @{

  */

/**
  * @
}
  */

/** @defgroup RTC_Private_FunctionPrototypes
  * @{

  */

/**
  * @
}
  */

/** @defgroup RTC_Private_Functions
  * @{

  */

/**
  * @brief  Enables or disables the specified RTC interrupts.
  * @param  RTC_IT: specifies the RTC interrupts sources to be enabled or disabled.
  *   This parameter can be any combination of the following values:
  *     @arg RTC_IT_OW: Overflow interrupt
  *     @arg RTC_IT_ALR: Alarm interrupt
  *     @arg RTC_IT_SEC: Second interrupt
  * @param  NewState: new state of the specified RTC interrupts.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState)
{

  /* Check the parameters */
  assert_param(IS_RTC_IT(RTC_IT));  
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {

    RTC->CRH |= RTC_IT;
  
}
  else
  {

    RTC->CRH &= (uint16_t)~RTC_IT;
  
}

}

/**
  * @brief  Enters the RTC configuration mode.
  * @param  None
  * @retval None
  */
void RTC_EnterConfigMode(void)
{

  /* Set the CNF flag to enter in the Configuration Mode */
  RTC->CRL |= RTC_CRL_CNF;

}

/**
  * @brief  Exits from the RTC configuration mode.
  * @param  None
  * @retval None
  */
void RTC_ExitConfigMode(void)
{

  /* Reset the CNF flag to exit from the Configuration Mode */
  RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF); 

}

/**
  * @brief  Gets the RTC counter value.
  * @param  None
  * @retval RTC counter value.
  */
uint32_t RTC_GetCounter(void)
{

  uint16_t tmp = 0;
  tmp = RTC->CNTL;
  return (((uint32_t)RTC->CNTH << 16 ) | tmp) ;

}

/**
  * @brief  Sets the RTC counter value.
  * @param  CounterValue: RTC counter new value.
  * @retval None
  */
void RTC_SetCounter(uint32_t CounterValue)
{
 
  RTC_EnterConfigMode();
  /* Set RTC COUNTER MSB word */
  RTC->CNTH = CounterValue >> 16;
  /* Set RTC COUNTER LSB word */
  RTC->CNTL = (CounterValue & RTC_LSB_MASK);
  RTC_ExitConfigMode();

}

/**
  * @brief  Sets the RTC prescaler value.
  * @param  PrescalerValue: RTC prescaler new value.
  * @retval None
  */
void RTC_SetPrescaler(uint32_t PrescalerValue)
{

  /* Check the parameters */
  assert_param(IS_RTC_PRESCALER(PrescalerValue));
  
  RTC_EnterConfigMode();
  /* Set RTC PRESCALER MSB word */
  RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16;
  /* Set RTC PRESCALER LSB word */
  RTC->PRLL = (PrescalerValue & RTC_LSB_MASK);
  RTC_ExitConfigMode();

}

/**
  * @brief  Sets the RTC alarm value.
  * @param  AlarmValue: RTC alarm new value.
  * @retval None
  */
void RTC_SetAlarm(uint32_t AlarmValue)
{
  
  RTC_EnterConfigMode();
  /* Set the ALARM MSB word */
  RTC->ALRH = AlarmValue >> 16;
  /* Set the ALARM LSB word */
  RTC->ALRL = (AlarmValue & RTC_LSB_MASK);
  RTC_ExitConfigMode();

}

/**
  * @brief  Gets the RTC divider value.
  * @param  None
  * @retval RTC Divider value.
  */
uint32_t RTC_GetDivider(void)
{

  uint32_t tmp = 0x00;
  tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16;
  tmp |= RTC->DIVL;
  return tmp;

}

/**
  * @brief  Waits until last write operation on RTC registers has finished.
  * @note   This function must be called before any write to RTC registers.
  * @param  None
  * @retval None
  */
void RTC_WaitForLastTask(void)
{

  /* Loop until RTOFF flag is set */
  while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET)
  {

  
}

}

/**
  * @brief  Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
  *   are synchronized with RTC APB clock.
  * @note   This function must be called before any read operation after an APB reset
  *   or an APB clock stop.
  * @param  None
  * @retval None
  */
void RTC_WaitForSynchro(void)
{

  /* Clear RSF flag */
  RTC->CRL &= (uint16_t)~RTC_FLAG_RSF;
  /* Loop until RSF flag is set */
  while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET)
  {

  
}

}

/**
  * @brief  Checks whether the specified RTC flag is set or not.
  * @param  RTC_FLAG: specifies the flag to check.
  *   This parameter can be one the following values:
  *     @arg RTC_FLAG_RTOFF: RTC Operation OFF flag
  *     @arg RTC_FLAG_RSF: Registers Synchronized flag
  *     @arg RTC_FLAG_OW: Overflow flag
  *     @arg RTC_FLAG_ALR: Alarm flag
  *     @arg RTC_FLAG_SEC: Second flag
  * @retval The new state of RTC_FLAG (SET or RESET).
  */
FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
{

  FlagStatus bitstatus = RESET;
  
  /* Check the parameters */
  assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); 
  
  if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET)
  {

    bitstatus = SET;
  
}
  else
  {

    bitstatus = RESET;
  
}
  return bitstatus;

}

/**
  * @brief  Clears the RTC's pending flags.
  * @param  RTC_FLAG: specifies the flag to clear.
  *   This parameter can be any combination of the following values:
  *     @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
  *                        an APB reset or an APB Clock stop.
  *     @arg RTC_FLAG_OW: Overflow flag
  *     @arg RTC_FLAG_ALR: Alarm flag
  *     @arg RTC_FLAG_SEC: Second flag
  * @retval None
  */
void RTC_ClearFlag(uint16_t RTC_FLAG)
{

  /* Check the parameters */
  assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); 
    
  /* Clear the corresponding RTC flag */
  RTC->CRL &= (uint16_t)~RTC_FLAG;

}

/**
  * @brief  Checks whether the specified RTC interrupt has occurred or not.
  * @param  RTC_IT: specifies the RTC interrupts sources to check.
  *   This parameter can be one of the following values:
  *     @arg RTC_IT_OW: Overflow interrupt
  *     @arg RTC_IT_ALR: Alarm interrupt
  *     @arg RTC_IT_SEC: Second interrupt
  * @retval The new state of the RTC_IT (SET or RESET).
  */
ITStatus RTC_GetITStatus(uint16_t RTC_IT)
{

  ITStatus bitstatus = RESET;
  /* Check the parameters */
  assert_param(IS_RTC_GET_IT(RTC_IT)); 
  
  bitstatus = (ITStatus)(RTC->CRL & RTC_IT);
  if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET))
  {

    bitstatus = SET;
  
}
  else
  {

    bitstatus = RESET;
  
}
  return bitstatus;

}

/**
  * @brief  Clears the RTC's interrupt pending bits.
  * @param  RTC_IT: specifies the interrupt pending bit to clear.
  *   This parameter can be any combination of the following values:
  *     @arg RTC_IT_OW: Overflow interrupt
  *     @arg RTC_IT_ALR: Alarm interrupt
  *     @arg RTC_IT_SEC: Second interrupt
  * @retval None
  */
void RTC_ClearITPendingBit(uint16_t RTC_IT)
{

  /* Check the parameters */
  assert_param(IS_RTC_IT(RTC_IT));  
  
  /* Clear the corresponding RTC pending bit */
  RTC->CRL &= (uint16_t)~RTC_IT;

}

/**
  * @
}
  */

/**
  * @
}
  */

/**
  * @
}
  */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
			
...
Expand> <Close

Want complete source code? Download it here

Point(s): 0

Download
0 lines left, continue to read
Sponsored links

File list

Tips: You can preview the content of files by clicking file names^_^
Name Size Date
01.97 kB
01.97 kB
core_cm3.c16.87 kB2010-06-07 10:25
core_cm3.h83.71 kB2011-02-09 14:59
startup_stm32f10x_hd.s15.14 kB2011-03-10 10:52
stm32f10x.h619.08 kB2011-03-10 10:51
system_stm32f10x.c35.70 kB2011-03-10 10:51
system_stm32f10x.h2.04 kB2011-03-10 10:51
01.97 kB
01.97 kB
misc.h8.77 kB2011-03-10 10:47
stm32f10x_adc.h21.18 kB2011-03-10 10:47
stm32f10x_bkp.h7.38 kB2011-03-10 10:47
stm32f10x_can.h26.91 kB2011-03-10 10:47
stm32f10x_cec.h6.42 kB2011-03-10 10:47
stm32f10x_crc.h2.11 kB2011-03-10 10:47
stm32f10x_dac.h14.88 kB2011-03-10 10:47
stm32f10x_dbgmcu.h3.73 kB2011-03-10 10:47
stm32f10x_dma.h20.27 kB2011-03-10 10:47
stm32f10x_exti.h6.66 kB2011-03-10 10:47
stm32f10x_flash.h24.85 kB2011-03-10 10:47
stm32f10x_fsmc.h26.38 kB2011-03-10 10:47
stm32f10x_gpio.h19.70 kB2011-03-10 10:47
stm32f10x_i2c.h29.33 kB2011-03-10 10:47
stm32f10x_iwdg.h3.74 kB2011-03-10 10:47
stm32f10x_pwr.h4.28 kB2011-03-10 10:47
stm32f10x_rcc.h29.74 kB2011-03-10 10:47
stm32f10x_rtc.h3.77 kB2011-03-10 10:47
stm32f10x_sdio.h21.35 kB2011-03-10 10:47
stm32f10x_spi.h17.31 kB2011-03-10 10:47
stm32f10x_tim.h51.20 kB2011-03-10 10:47
stm32f10x_usart.h16.16 kB2011-03-10 10:47
stm32f10x_wwdg.h2.90 kB2011-03-10 10:47
01.97 kB
misc.c6.88 kB2011-03-10 10:47
stm32f10x_adc.c46.09 kB2011-03-10 10:47
stm32f10x_bkp.c8.26 kB2011-03-10 10:47
stm32f10x_can.c44.05 kB2011-03-10 10:47
stm32f10x_cec.c11.38 kB2011-03-10 10:47
stm32f10x_crc.c3.27 kB2011-03-10 10:47
stm32f10x_dac.c18.64 kB2011-03-10 10:47
stm32f10x_dbgmcu.c5.03 kB2011-03-10 10:47
stm32f10x_dma.c28.91 kB2011-03-10 10:47
stm32f10x_exti.c6.80 kB2011-03-10 10:47
stm32f10x_flash.c61.08 kB2011-03-10 10:47
stm32f10x_fsmc.c34.65 kB2011-03-10 10:47
stm32f10x_gpio.c22.68 kB2011-03-11 17:43
stm32f10x_i2c.c44.71 kB2011-03-10 10:47
stm32f10x_iwdg.c4.80 kB2011-03-10 10:47
stm32f10x_pwr.c8.55 kB2011-03-10 10:47
stm32f10x_rcc.c50.07 kB2011-03-10 10:47
stm32f10x_rtc.c8.40 kB2011-03-10 10:47
stm32f10x_sdio.c28.25 kB2011-03-10 10:47
stm32f10x_spi.c29.52 kB2011-03-10 10:47
stm32f10x_tim.c106.60 kB2011-03-10 10:47
stm32f10x_usart.c37.41 kB2011-03-10 10:47
stm32f10x_wwdg.c5.60 kB2011-03-10 10:47
01.97 kB
01.97 kB
systick.hex18.40 kB2013-08-15 19:23
01.97 kB
I2C_MPU6050.c4.69 kB2013-08-15 19:23
I2C_MPU6050.h1.13 kB2013-08-15 19:10
I2C_MPU6050.uvgui.Orange131.20 kB2013-08-15 19:25
I2C_MPU6050.uvgui.flyleaf66.57 kB2012-06-25 20:54
I2C_MPU6050.uvopt10.45 kB2013-08-15 19:25
I2C_MPU6050.uvproj16.56 kB2013-08-15 19:00
JLink497.00 B2012-06-25 20:12
JLinkSettings.ini375.00 B2012-06-24 14:45
delay.c177.00 B2011-08-10 16:44
delay.h98.00 B2011-08-08 21:03
main.c1.48 kB2013-08-15 19:11
stm32f10x_conf.h3.22 kB2012-06-24 22:12
stm32f10x_it.c4.30 kB2011-04-04 19:03
stm32f10x_it.h2.04 kB2011-04-04 19:03
usart1.c5.33 kB2013-08-15 14:40
usart1.h234.00 B2011-08-05 21:11
keilkilll.bat399.00 B2011-04-23 10:24
...
Sponsored links

stm32f10x_rtc.c (294.78 kB)

Need 0 point
Your Point(s)
Download Download

Download failed? Click here to download one by one.

Tip: this source code project contains 2 packages, please click the allow button on the browser pop-up dialog,after you click the download button.

▪ Click to download this source code directly

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D