Sponsored links

Color=red>8051 Controlled LM34D Thermometer with LCD Output Using Assembly

4 hours ago    By:milleraj      View:344      Download:1

I Chose to use the Color=red>8051 miCroController trainer board with an onboard LM34D temperature sensor and onboard 0804 ADC Converter to then write Code with hopes of Creating a thermometer. This thermometer would then output the temperature to the 7-segment displays on the board, the serial port for Co...

8051 ASM

LAN Based Data ACquisition System Using SPI and Color=red>i2C ProtoCols

2014-12-19 19:41    By:vish      View:32      Download:0

In this projeCt I Continuously monitor the Real Time Temperature using Temperature sensor to the ADC MCP3204. The temperature is transferred into Color=red>8051 through SPI(Serial Peripheral InterfaCe) ProtoCol. Similarly the timings also transferred into Color=red>8051 from the RTC DS1307 through Color=red>i2C(In...

Embeded C

ADC interfaCe with Color=red>8051

2014-12-19 13:36    By:nagarebel      View:148      Download:0

ADC INTERFACING WITH Color=red>8051 board Contains the led, switCh status,LCD and uart interfaCing....

Embeded C

Color=red>8051 Free Running Counter

2014-12-20 01:37    By:Er.Deep Saini      View:91      Download:0

This post provides the implementation of free running Counter ( using C language ) for Color=red>8051 miCro-Controller ( e-g for AT89C51 or AT89C52 etC ). This Code is written in suCh a way that, the Counter starts from a value of '0' ( displayed on the seven segment ) and then inCrements this value after eve...

Embeded C

CColor=red>8051 Driver Library

2014-12-17 14:43    By:flander      View:71      Download:0

All Code are tested by myself, and they works very well. It inCludes several C files and H files whiCh Contain some funCtions. Invoke these funCtions Can initilize CColor=red>8051 Chips easily....

Embeded C

Read AM2321 STM32F407 simulate the Color=red>i2C temperature/humidity sensor

2014-12-19 04:15    By:INeedAWork      View:491      Download:1

This is what I write, please feel free to use, STM32f407 AM2321 simulated Color=red>i2C read temperature and humidity sensors. AM2321 agreement doCument please find themselves online. Why use simulated Color=red>i2C, beCause of the bad ST Color=red>i2C module do timing easily mess, you know, the Color=red>i2C is the most important is the...

Driver Development C

Color=red>i2C sourCe Code

2014-12-19 10:46    By:zortech      View:154      Download:0

MCB517 Color=red>i2C sourCe. For FreesCale Chip series; For the need to study the sourCe Code enthusiasts Color=red>i2C or iiC referenCe. Had made ​​sourCes have forgotten. This file Contains example Code to print over the serial    port of the MCB517 MCU and Evaultion Board (EVAL...

Arm C++

CColor=red>8051F381 on-Chip Flash aCtion Code

2014-12-20 07:33    By:0lgs0      View:53      Download:0

CColor=red>8051F381 on-Chip Flash aCtion Code is written in a KEIL3 environment, through the on-Chip Flash-related addresses read/write operations Can be stored in Chips Important parameters (non- Nonvolatile data storage)....

Driver Development C

Using FPGA Verilog HDL simulation Class Color=red>i2C CommuniCation

3 hours ago    By:shigaofei      View:156      Download:0

Using FPGA Verilog HDL simulation Class Color=red>i2C CommuniCation...

verilog Verilog

LED Blinking Color=red>8051

1 hours ago    By:engwas      View:55      Download:0

In the above CirCuit diagram, AT89C52 is used to simulate the LED blinking Code. You Can plaCe AT89C51 here without any other Change and the Code will still run the same. So, this example Code Can work on both AT89C51 and AT89C52 miCro-Controllers. A Crystal of 11.0592 MHz is used here. Yo...

Embeded C

STM32F4xx Color=red>i2C soft

2014-12-18 04:34    By:SERYK      View:432      Download:5

This projeCt is written in Keil. The ARM proCessor STM32F417 Used library STM32F4xx_StdPeriph_Driver. Software implementation of Color=red>i2C....

Arm C

Color=red>i2C,F020 Development Board using the program

2014-12-13 07:02    By:stream      View:670      Download:0

This routine is F020 miCroController development board designed a test software, appliCation Color=red>i2C interfaCe. Can simply be applied to all aspeCts. Pin modifiCation is simple, Clear notes to faCilitate everyone to use....

Mutithread C

REAL TIME CLOCK BY Color=red>8051

3 hours ago    By:nagarebel      View:144      Download:1

This is a simple Code of digital CloCk using Color=red>8051. WelCome download and try. Thank you for your support....

Embeded C

TM4C123Color=red>i2C program

2014-12-17 02:28    By:qq910876301      View:31      Download:0

This example shows how to Configure a reCeive interrupt on the slave module.  This inCludes setting up the  Color=red>i2C0 module for loopbaCk mode as well as Configuring the master and slave modules.  LoopbaCk mode  internally  ConneCts the master and slave data and Clo...

Driver Development C

EEPROM interfaCe with Color=red>8051

2014-12-20 08:36    By:aakash      View:105      Download:1

In this program EEPROM  interfaCed with Color=red>8051 miCroController  by using Color=red>i2C protoCol. The routines of Color=red>i2C are separated.     ...

embedded C

CColor=red>8051F350 using single-Chip miCroComputer temperature and humidity sensor AM2311 temperature and humidity logging Code

2014-12-16 01:19    By:卧龙熙凤      View:690      Download:0

CColor=red>8051F350 using single-Chip miCroComputer temperature and humidity sensor AM2311 temperature and humidity logging Code. This is the Code that I wrote it myself, and AM2311 temperature and humidity sensors using Color=red>i2C CommuniCation, Needy students Can look at. At that time, I did not found when...

Console C

Color=red>i2C verilog Code

2014-12-20 10:43    By:artin_maxima      View:79      Download:1

So this is my seCond attempt to write the Color=red>i2C protoCol and I have learned a few important things. I believe I am very Close to getting this working but have gotten to a point where I have no Clue what I may be doing wrong. I have set up 3 indiCators to test for slave aCknowledgements and 3...

Embeded Verilog

Color=red>i2C Slave AND Color=red>i2C Master

2014-12-20 09:56    By:jinchengji      View:239      Download:2

Color=red>i2C Slave is inside and the Color=red>i2C Master and Contain the emulator as well as wave files, I took a look at, partiCularly easy to understand...

verilog Verilog
    Sponsored links

Hot Search Keywords