Search ADXL335 accelerometer, 59 result(s) found

G1037单轴摆式伺服线加速度计试验方法,一片很不错的论文

G1037 uniaxial accelerometer tilting servo line test method, a very good paper...

This program implements all aspects of readout of ADXL accelerometer in Delphi....

This program implements all aspects of readout of ADXL accelerometer in Delphi. It enables plotting and checking of output of typical ADXL 202 accelerometer. You can set RS via ini file and add more functionality Do not work with ADXR gyros....

多功能USB转串口 + AVR实验板文档 这是整理后的资料,包含了SCH和PCB。除了多功能USB转串口 + AVR实验板的资料外,里面还包含了我做的一个A...

Multi-function USB-Serial+ AVR Experiment board a document which is collated data, including a SCH and PCB. In addition to multi-function USB-Serial+ AVR Experiment board information, which also includes what I am doing an AVR+ accelerometer+ nRF2401 a small board documents. Acceleration sensor is M...

The use of FPGA to collect the new U.S. accelerometer data and the data collecte...

The use of FPGA to collect the new U.S. accelerometer data and the data collected FPGA passed ARM system processing...

accelerometer directional controlled robot

This project content how to control a direction of robot in forword , reverce, left right and also the drift...Using adlx gyro sensor... it uses x and y coordinates onley....

MMA7361L ±1.5g, ±6g Three axis accelerometer Module (Two Line)

MMA7361L is a Three axis Low-G accelerometer with user selectable 1.5g or ±6g acceleration range. Board has all the necessary components required for the accelerometer. Board comes with onboard 3.3V Low Drop voltage regulator. accelerometer module can be powered from 2.2V to 6V. MMA7361L accelerome...

LSM303DLHC e-Compass 3 axis accelerometer and 3 axis Magnetometer Module

IntroductionThe LSM303DLHC is a digital 3 axis accelerometer and 3 axis magnetometer with I2C interface. It has full-scale acceleration range of ±2g to ±16g and full scale magnetic field range of ±1.3 to ±8.1 gauss. All the full scale ranges are user selectable. Module has on board low drop volt...

Triple Axis accelerometer Sensor Library for PIC

This library is write to use ADXL345 3-axis accelerometer.First use adxl345_init() to initial SPI and ADXL345. If returned 0 it's initialed correctly.You can use:...

lpc 2148 adc

1)The LPC2148 dev. board was from nex robotics. link : http://www.nex-robotics.com/lpc2148-development-board/lpc2148-development-board.html 2)GPS module : Mediatek MT3318 chipset based module link : http://www.nex-robotics.com/products/gps-receiver/gps-receiver-mt3318-module.html 3)accelerometer...

prev 1 2 3 4 5 6 next
Sponsored links

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D