Search bjnd Rate this Article : Current : 23, 300 result(s) found

lpc2368 peripheral

lpc2368 peripheral driver for keil compiler environment . this consist timer initialization, system initialization source programs....

RS232 serial port access m-16

For RS232 access, environmental vs2012, can send and receive 16 binary data directly, as a software serial communication serial debugging or open. Can be run directly....

FT2232H USB to I2C interface

USB to I2C Inteface using FT2232H Overview: this example project for the FT2232H demonstRates how to use the device's Multi-Protocol Synchronous Serial Engine (MPSSE) to make a USB to I2C bus interface using the FT2232H. The executable application and full project code are provided. Req...


Frequency Range : 433/868/915MHz ISM bands Sensitivity = –120 dBm Output power range :  +30 dBm Max (RFM23BP) Low Power Consumption 25mA receive 550mA @ + 30dbm transmit Data Rate = 0.123 to 256 kbps FSK, GFSK,...

TCS2300 and LCD

Run this program on the basis of the STM32, through the LCD liquid crystal display, to TCS2300 color sensor is identified by testing the LCD liquid crystal color bars on the left, in the area on the right shows the corresponding color and displays the size of the r, g, b and luminance....

RS232 Communications applet

this is my learning CVI to download a small program, this program according to the CVI serial routines overwrite, you can change the port number, baud Rate, and other parameters. Serial port status LED and joined the show....

lpc2368 7 segment

Drive two 7 seg with lpc2368 and a button two increment numbers. I used lpc2368 header board. IAR is used as compiler....

TM4C123I2C program

this example shows how to configure a receive interrupt on the slave module.  this includes setting up the  I2C0 module for loopback mode as well as configuring the master and slave modules.  Loopback mode  internally  connects the master and slave data and clo...


this document describes the Universal Asynchronous Receiver Transmitter (UART) VHDLcomponent which can be used either with the PmodRS232 or with an on-board RS232 port. A UARTcomponent is used to convert serial data to parallel data, and parallel data to serial data. The serialdata transferred into...

prev 1 2 3 4 5 6 7 8 9 10 ... 30 next
Sponsored links


Don't have an account? Register now
Need any help?
Mail to:


CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D