USB to I2C Inteface using FT2232H
This example project for the FT2232H demonstrates how to use the device's Multi-Protocol Synchronous Serial Engine (MPSSE) to make a USB to I2C bus interface using the FT2232H. The executable application and full project code are provided.
Req... Driver DevelopmentC++
ADSP m25p16 driver code, I personally tested, you can download the trial. Connect the cable, Visual DSP++ Environment loaded in the drive.
To download or read the information w25q16.... Driver DevelopmentC
Packaged USB HID driver, based on MFC, this version belongs to the debug version, might be having a little trouble, but test all HID devices can open and identify the inserted PC... Driver DevelopmentC++
Download this program can be a good learning USB read-write, do a USB card reader that can read and write with the STM32, and read and write content can be displayed on the screen, is helpful for all development reader... Driver DevelopmentC
C++USB, HId, as a slave, PC HID communications program source code. Included with VS2005 Project 2010 files. USB communication is learning good routines. And the lower position machine can achieve control of the LED lights on the PC Board. ...... Driver DevelopmentC++
USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega48 or an ATMega8 and a couple of passive components.
The programmer uses a firmware-only USB driver, no special USB controller is needed.
- Works under multiple platforms. Lin... AndroidLabView
AvrUSB simulation, produced the MKII burner,
This file documents changes in the software, firmware and hardware of the
AVR-Doper project. New entries are always appended to the end of the file.
Scroll down to the bottom to see the most recent changes.
* Release 2006-07-18
- Adde... EmbededC
The example code for STM32F103RC with USB HID type.
You can see the software connection of MCU with USB in hardware config file.
This example allow you interface mcu stm32 with PC via USB HID. You can send data from stm32 to PC...... EmbededC
Developers reading this VC++ code need to be considerable, especially in basic principles on how to recognize the USB device and USB developers with a certain knowledge of the application. Program demonstrates how to compose high level application communicate with a USB interface, operation environm... CommunicationVisual C++
WMI (Windows ® Management Instrumentation) is very powerful, it can be in the form of database queries your computer software and hardware in its database, always save the latest software and hardware information, so you can use WMI to main frequency, temperature measuring CUP, read the WINDOWS pro... AlgorithmDelphi
Stm32F407zgt6 USB_host_OTG u disk read and write routines implemented features are: Insert u disk directory read, writing data to the u disk, USB HID device descriptor of any insert, the configuration descriptor, the interface descriptor and endpoint descriptors, such as reading.... OtherC
U send and receive large amounts of data sample program (corresponds to the position machine procedure, USBDevMuch.exe)
PC driver for USB Device, suitable for Windows98/2000/XP.
PC operation USB Device dynamic-library, PC-side program of the sample code using the dynamic libraries.... EmbededC