** NS2 simulator for 802.15.4 (release v1.1) ***
zigBee routing is now maintained by zigBee NWK WG and
no longer included in this release.
>>> Platforms supported
ns2 version: 2.26 and 2.27
OS: Linux, Sun Solaris and FreeBSD
1) Unpack th... Ns-2C++
MCUProductionprogrammer Silicon Lab
In-system programming involves programming
devices after installation inthe end system. In this
scenario, access to the debug pins (JTAG or C2
interface) is provided in the end system to enable
connection to a programming "Master". This pro-gramming "Ma... EmbededVisual C++
zigbee is based on the IEEE802.15.4 standard for low-power personal area network 协议 。 According to this agreement provides technology is a short-range, low-power wireless communication technology. This name comes from the character dances of bees, as bees (bee) is achieved by flying and "buzz"... jn5148C++
This example provides a description of how to program the STM32F4xx FLASH.
After Reset, the Flash memory program/Erase Controller is locked. To unlock it,
the FLASH_Unlock function is used.
Before programming the desired addresses, an erase operation is performed using
the flash erase sector fe... ArmC
Okay,,, eine doofe beschreibung...
Man muss etwas hochladen, um etwas herunterladen zu können...
So ein Scheiss!!!!
Noch mehr davon
Immer noch mehr.
Und das reicht
Ach, vergiss e... ConsoleC++
Linux camera program by Qt(embedded),this program is for linux video devices,it is fit UVC.this text tile to the operating system, linux camera, according to the program and the procedure demonstration. You want to make myself edition.... Linux programmingC++
HI, i have developed project "shutdown Remote pc using Rc5 protocol", In this project i configure serial communication between linux terminal and 8051 controller. I have decoded the Rc5 code using embedded c in 8051 and send command to the linux using UART serially. I have conneccted total 10... Linux programmingC
This fille is the final project of the first year course programação. This is the final project and everything you need is right here.
The language used is C and is written in a very simple way so that everyone can understand.
This project is a model of several aircrafts... Linux programmingC
server side of the program to communicate with a client program.
the client and server programs will will use the echo and reply functions to communicate.
-create the makefile
-to run makefile and compile, type "make"
-enter the command line paramaters to either take in a f... Linux programmingC