Upload Code
loading-left
loading loading loading
loading-right

Loading

Profile
No self-introduction
codes (4)
KCF trace code using qtcreate
no vote
KCF trace code using qtcreatot. I tested it and it can be used. KCF tracking is very fast, but it has a disadvantage that the tracking effect is not good after occlusion.
sxakhyct
2020-01-15
0
1
QT5+OpenCv3, you can use the code
no vote
Application background Online to see a lot of tutorials, but in accordance with the tutorial is not in fact, and that most of them are copied, obviously out of. This is my own reading, and then consulted a lot of people, step by step, and finally came up with a trial.Using the QT5.5.1, the use of OpenCV 3We mainly want to see my pro file inside the INCLUDEPATH and LIBS method
sxakhyct
2016-08-23
3
1
Using Components Workbench Connected (CCW) to achi
4.0
Application background This program uses Components Workbench Connected (CCW) to click on the speed, can achieve the motor is rotating, reverse, acceleration and deceleration function, frequency converter is used in PowerFlex520, Micro850 series is the use of. Reform program has passed the teacher's acceptance. Key Technology Using the latest version of CCW8.0, as well as the most commonly used Micro850 series controller, in the speed control process to achieve a more stable transmission function. Although there is no interface, but the follow-up can increase the control interface.
sxakhyct
2016-08-23
0
1
Double target set program code
4.3
Application background This procedure can be used to carry out the position of the target location, through the calibration of two cameras, can determine the precise position of a target in the air. Is the subject of graduation design. Key Technology This program uses a better algorithm, can quickly carry out the space positioning, return the location information. And it has better robustness. And it has better robustness. And it has better robustness.
sxakhyct
2016-08-23
0
1
No more~