Upload Code
loading-left
loading loading loading
loading-right

Loading

Profile
No self-introduction
codes (3)
VS_MFC velocity curve, double buffered drawing
no vote
This control is only a very simple controls, it curves slightly complex than Task Manager, does not have a legend, mouse movements can be captured on the curve coordinate properties. Are detailed as follows: 1) derived from CStatic, and easy to use in a dialog box. 2) to scale automatically changes the size of the dialog box, assuming no change in the position of other elements in the dialog box. 3) thickness of the curve, color, line type (solid, dashed line) can be set free. 4) you can hide/show the control curve. 5) two axis, y axis based on the data of adaptive, the deviation of the actual maximum and minimum values of the data 5% is the maximum and minimum axis values (simplicity, the axis by quintile). The x axis is the timeline, a pixel represents a single data point, assuming the sampling according to a certain frequency. 6) you can add multiple curves. 7) use double buffering to avoid flashing graphics. A CStatic derived controls ba
douhaoexia@163.com
2016-08-23
0
1
CH395 official information routines C51
no vote
CH395 is an Ethernet protocol stack management chip, for single-chip Ethernet communication system. CH395 self-10/100M Ethernet media transport layer (MAC) and physical layer (PHY), fully compatible with IEEE802.3 10/100M agreements, built-in about PPPOE, IP, DHCP, ARP, ICMP, IGMP, UDP, TCP, Ethernet protocol stack firmware. Monolithic integrated circuit system makes it easy to carry network traffic through the CH395 chip. CH395 supports three types of communication interface: 8-bit parallel, SPI interface or asynchronous serial,/DSP/MCU/MPU single-chip controller can communicate through either Ethernet communications interface control CH395. CH395 is often used in graduate design, designed for college students understand the development of TCP/IP. Source CH395 in TCP/UDP mode drivers and interfaces such as function.
douhaoexia@163.com
2016-08-23
0
1
TCP debugging assistant
no vote
Includes source code. This test tools for the development of network communication program was on the server or client to test the TCP/UDP communication connect and tests the sending and receiving of data. 1 can send and receive UDP data. 2. TCP, supports server and client model. 3. support multiple connections, can operate on multiple network connections simultaneously 4. for UDP, Supports multicast. 5. displaying the current data transmission speed 6. data displayed consists of both ASCII and HEX 7. to send the file. 8. received data can be saved to a file in real time!
douhaoexia@163.com
2016-08-23
0
1
No more~