No self-introduction
Loading
Profile
Follow
codes (4)
STM32F4DISCO drives Siemens SDA5708-24D Display to
no vote
This Project contains code that drives a DBOX-1 used LED-Dox Alpha-Display by an STM32F4Disco board. I needed a CI-V Bus Monitor to controll an older Mosfet RF-power amplifier by a moden ICOM Ham Radio Transceiver IC-756Pro3 and IC7400. The Serial port is used to build a ci-v Interface and the Display Show's the received civ command sended by the TRanceiver, if the VFO is moved. The Project uses Keil IDE and allows to compiles in the free Limit of 32Kbyte. The DBOX1 is an obsolete settop box from Nokia that uses an 8 Digit alphanumeric dot led's with an build-in Decoder. The Display is linked to the host by a two wire Serial line (clk,data) and supports custom chacaters like a packman :-) I had build an Interface to the CI-V-Bus ths was electrically decoupled by opto coupler to get the tranceiver save. The most Interfaces i know, does'nt do this - a shame.
Juppeck414199 0 0
1
TEST of STM32F103VC, FSMC, SSD1963, emWIN, CoOS V2
5.0
This just a demo of emWIN graphic lib from ST, joinded by an SSD1963 TFT-Driver, 4 AD-CHannles supported by DMA, values outprinted by RS232 and generated a CAN Frame. The IDE from Keil is used - any other GCC should work.
Juppeck414199 1 0
1
Stm32f103vc ucgui3.90a ssd1963 (hy35a) μ cos II - Example
4.0
Based on stm32f103vc (256 megabytes) as an example of keil-mdk4.xx project, hy35a TFT uses ssd1963 in μ Cos-II / μ cgui3.90a environment. I have implemented the ssd1963 driver to μ cgui environment, which makes the demo work well and fast. Sometimes, it lacks a black display due to a quick access to the display register and failure. Reset to solve these problems, it works quite well, until again. This behavior seems to be a problem with the combination of μ Cos-II and μ c-gui3.90a. Similar implementations use μ Cos-II and the new μ gui5.20d without any failure. Well, I think this is just a demo to illustrate how powerful stm32f1 works and an example of how ssd1963 is the μ cgui implementation GUI.
Juppeck414199 0 0
1
STM32F103VC using FSMC joind HY35A SSD1963 Display
2.5
This is just a sample project, written in "C" ssd1963 3.5 "how TFT display screen (hy35a) is programmed and joined through FSMC bus by using keil μ vision 4, XX and MDK 4.72.
Juppeck414199 0 0
1
No more~
Follows0
Fans0