No self-introduction
Loading
Profile
Follow
codes (2)
temperature sensor
3.0
Carry out a project in MPLAB to temperature using the temperature sensor output voltage, make that binary value and then display it on the LCD of the plate MCElectronics Students starter kit. They should also add USB port connectivity through the MCP2200 CI of Microchip. The PC display can be by HyperTerminal, Labview, Matlab, or Processing (MIT free software https://processing.org/download/), finally aims at a "thermal alarm", this alarm will be to monitor the temperature of an enclosure, which can be a room, a PC Cabinet or an industrial oven want to control its temperature. The temperature of the enclosure must be displayed at all times through a LCD (as mentioned above), where the temperature should be displayed with a digit decimal precision. The alarm at the same time must be predefined by the developer temperature critical, in which if the enclosure exceeds this temperature, activates the red LED RGB color indicating that the temperature is above the value critical and
JESUS_TAPIA 0 0
1
ds1307 source code C18
no vote
This code has RTC sensor, DS1307 source code. The purpose of the project is to design a system μ controlado with real-time clock alarm, data visualization screen and actuator configuration. The date and time automatically allowed to be set, as well as the days of different alarm systems in different periods, are defined in this way by changing the system setting button and obtaining the visual representation of the data in the installed LCD module. The system can be automatically configured to take action on external alarms or allow manual operation on sirens. Before you start, we will select the elements, the project we are going to carry out, because it is a very versatile project, and there are many combinations of elements, which will lead to the same result.
JESUS_TAPIA 0 0
1
No more~
Follows0
Fans0