ad9833 based function generator
2016-08-23
1 0 0
4.0
Other
Earn points
Note: power on the +12V rail is about 90mA rising to 110mA with the outputs loaded and the freq. at 20Mhz.
Power on the -12V rail is about 15mA rising to 23.7mA at 11MHz(peak load frequency) with the AD811 output loaded with a short or capacitor. With such low power requirements lends itself to a low power inductor based inverter using the TPS6735 plus the following:
C1 44uF, C2 10uF, C3 1uF, C4 ~44uF, C5 22uF, D1 1N5817 (schottky 1A 20V), L1 10uH, L2 22uH
The whole board will be about 17mm x 43mm and plug into the two 100uF capacitors pads on the DDS 20 board, one capacitor is transfered to the
Power on the -12V rail is about 15mA rising to 23.7mA at 11MHz(peak load frequency) with the AD811 output loaded with a short or capacitor. With such low power requirements lends itself to a low power inductor based inverter using the TPS6735 plus the following:
C1 44uF, C2 10uF, C3 1uF, C4 ~44uF, C5 22uF, D1 1N5817 (schottky 1A 20V), L1 10uH, L2 22uH
The whole board will be about 17mm x 43mm and plug into the two 100uF capacitors pads on the DDS 20 board, one capacitor is transfered to the
c
AD
函数
基于
产品
发生器
Related Source Codes
PClite
0
0
no vote
generic embeded FTP Client
0
0
no vote
UDP Test Demo
0
0
no vote
TMS320F28335 DSP transmits data to EEPROM through
0
0
no vote
TMS320F28335 CAN communication source code
0
0
no vote
No comment