Cc1100e communication demo sample program
2016-08-23
0 0 0
4.0
Other
Earn points
Procedure based on the cc1100e wireless communication module, initialization sets the communication speed for the 2.4k setting. Depending on their communication requirements change.
More than two file in the program to receive-side and send-side program:
Sending and receiving process is as follows:
1, sends 60 bytes of data sent to the receiver and flashing red lights, and entry into the receiving State;
2, after receiver receives the data back to a 60 byte data and Flash a red light;
3, the sender receives a postback data receiver, right after flashing a green light;
4, 1S interval time, repeat steps 1 to 3.
More than two file in the program to receive-side and send-side program:
Sending and receiving process is as follows:
1, sends 60 bytes of data sent to the receiver and flashing red lights, and entry into the receiving State;
2, after receiver receives the data back to a 60 byte data and Flash a red light;
3, the sender receives a postback data receiver, right after flashing a green light;
4, 1S interval time, repeat steps 1 to 3.
c
通信
程序
演示
cce
Related Source Codes
PClite
0
0
no vote
generic embeded FTP Client
0
0
no vote
UDP Test Demo
0
0
no vote
TMS320F28335 DSP transmits data to EEPROM through
0
0
no vote
TMS320F28335 CAN communication source code
0
0
no vote
No comment