F280x ADC Calibration
2016-08-23
0 0 0
no vote
Other
Earn points
DESCRIPTION
This example program runs from RAM on the EzDSP. It initializes the event manager to generate a periodic start of conversion (SOC) pulse to the ADC. This will trigger a conversion of the ADC and when completed the ADC will generate an interrupt. The interrupt is serviced and the ADC calibration function is called. This function will read two user selected reference channels and calculate the appropriate calibration gain and offset and then calibrate all other user channels.
// The program supports configuring the ADC for simultaneous or sequential
// conversion modes:
//
// SEQUENTIAL: ADC channels are converted one at a time:
// A0->A1->A2->...B0->B1->B2->....
//
// SIMULTANEO
c
校准
Related Source Codes
PClite
0
0
no vote
generic embeded FTP Client
0
0
no vote
UDP Test Demo
0
0
no vote
TMS320F28335 DSP transmits data to EEPROM through
0
0
no vote
TMS320F28335 CAN communication source code
0
0
no vote
No comment