No self-introduction
Loading
Profile
Follow
codes (5)
Image median filtering based on Leonardo da Vinci
no vote
Connect the computer and DSP emulator for all lab equipment is powered on, open the CCS3.3 and connect card. Plug the video cable connection Board input, connect the monitor inputs on the other side, turn to AV mode the display. Open the project MedianFilter.pjt, compile, download and run. The function of this project is: the camera captures an image median filtering, and output to the display.
zyj666zyj 0 0
1
Image based on Leonardo da Vinci DM6437 nonlinear
no vote
Connect the computer and DSP emulator for all lab equipment is powered on, open the CCS3.3 and connect card. Plug the video cable connection Board input, connect the monitor inputs on the other side, turn to AV mode the display. Open the project NolinearLogTransform.pjt, compile, download and run. The function of this project is: the camera captures an image nonlinear filtering, and output to the display.
zyj666zyj 1 0
1
Histogram calculation and display based on Leonard
no vote
Connect the computer and DSP emulator for all lab equipment is powered on, open the CCS3.3 and connect card. Plug the video cable connection Board input, connect the monitor inputs on the other side, turn to AV mode the display. Open the project HistogramDiagram.pjt, compile, download and run. The function of this project is: the camera captures an image histogram calculation and output to display the histogram.
zyj666zyj 0 0
1
Image space based on Leonardo da Vinci DM6437 low
4.0
Connect the computer and DSP emulator for all lab equipment is powered on, open the CCS3.3 and connect card. Plug the video cable connection Board input, connect the monitor inputs on the other side, turn to AV mode the display. Open the project SpatialLowPassFilter.pjt, compile, download and run. Features of this project are: spatial camera captures an image of low-pass filter, and output the image to the display.
zyj666zyj 0 0
1
Image sharpening based on Leonardo da Vinci DM6437
no vote
On-board system based on DM6437 chip, connect the computer and DSP emulator, the output of the camera input connected to the output board, the board received a monitor. In CCS3.3, open the project, compile and run, resulting .out file is downloaded to the chip to run the project. The project's features are: the camera captured an image sharpening, and outputs it to the display. It should be noted that the video format requires special attention, the camera output format is PAL, monitor input to AV.
zyj666zyj 0 0
1
No more~
Follows0
Fans0