No self-introduction
Loading
Profile
Follow
codes (1)
Nrf24 multi channel communications
no vote
NRF24L01 wireless dual-channel data transfer example module 6-channel receiver data there are several points to note: (1) set the EN_AA and EN_RXADDR registers, to make all channels allow receiving data and automatic responses, are set to 0x3f; (2) RX_PW_PX (x represents which channel) registers and sets the data length of the data being received, the maximum is 32 bytes, the default is 0; (3) write channel address, P0 and P1 channel is 40-bit address, but only 8-bit address P2 to P5, their 32-bit address same as P1 channel, so write a byte address as long as you can; (4) particular attention is write receive channel address is written lower addresses first, bear in mind. Particular attention to the first low address, for example, when you set it, should be different low, rather than high is different.
ansarn 0 0
1
No more~
Follows0
Fans0